Electric boosters are designed to fit
under counters and deliver sanitizing rinse water for all stationary
rack and conveyor type commercial dishwashers
Features & Benefits
Our 30 gallon electric booster will raise electric boosters are designed
to fit under counters and deliver sanitizing rinse water for all
stationary rack and conveyor type commercial dishwashers preheated or
cold water to 180° F rinse temperature for compliance with UL sanitation
(NSF5) and all federal, state, county and local health department
sanitation codes. In addition, these models can be used as circulating
tank commercial electric water heaters for gravity or pump circulation
to an auxiliary storage tank. They are available in 6 kW through 54 kW
and in 208, 240, 277 and 480 voltages.
System Sentinel
All electric booster models employ an element diagnostic panel,
utilizing light emitting diodes (L.E.D.), corresponding to the number
and location of each heating element. L.E.D.’s are energized when the
electric elements are operating. An unlit L.E.D. pinpoints the exact
location of a non- functioning element, making element operation
diagnosis simple and positive.
Long Life Tank Design
Proprietary steel formulation with a unique coat of high temperature
porcelain enamel maximizes corrosion resistance resulting in a superior
tank design.
Long Life Heating Elements
Separate screw-in type elements feature a Nichrome wire filament,
embedded in magnesium oxide sealed in a copper tube to resist water
chemical corrosion…for long element life and a long life performance.
Elements are directly immersed in the water for maximum recovery
efficiency (98%) and are easily changed by simply screwing new ones into
the tank.
Integral Fusing
All models have integral fusing for each element.
Anode rods
Two (2) magnesium anodes are installed in each tank for maximum corrosion resistance.
AGA/ASME Rated T&P Valve
Factory installed relief valve
Electrical Connections
Pre-wired, accessible control box with multiple knock-outs on side in
size selections to match the National Electric Code. Sizes range from
1/2" to 2". A grounding screw is provided for attaching an equipment
grounding conductor.
Single Panel Control Box
It comes with hinged stainless steel door that provides immediate access to all electrical components and elements.
Terminal Block
All models are equipped with UL Listed terminal blocks for simplicity of
installation. The terminal block will accept either copper or aluminum
field connect wire.
120 Volt Control Circuit
All units are furnished with a fused 120 volt control circuit. All
controls (thermostats, high temperature limit, etc.) are operated off of
this basic 120 volt control circuit. This circuit is created by an
internal multi-tap transformer of unique design that has four (4) taps
for the primary voltages, 208, 240, 277 and 480.