Home -> Products -> Commercial Products -> Commercial Water Heating Products -> Commercial Gas -> SPIDERfire

SPIDERfire

SPIDERfire® is a family of ultra high efficiency commercial gas water heaters with up to a 97 percent thermal efficiency. 

Features & Benefits

The advanced line of 80 and 100-gallon Rheem-Ruud SPIDERfire condensing water heaters offers breakthrough technology. It provides up to 97% thermal efficiency. The patented heat transfer system dramatically cuts fuel costs and is built to last. Models are available that range from 130,000-399,900 Btu/h, with a maximum temperature setting of 185 degrees.

Smart LCD Control System
 
The new diagnostic system is standard on all SPIDERfire models. It enables installers and service technicians to monitor key functions and components. The display is located at eye level and includes a scrollable, operational history to detail usage patterns and assist with troubleshooting.

Innovative Technology
 
The heart of the SPIDERfire is its patented multi-leg, triple pass heat exchanger.  The system is engineered as a ‘wet base’ design wherein the entire heat exchanger is submerged. That eliminates hot spots found in some other fully condensing water heaters. When hot spots are eliminated, the life of the product is extended and efficiency is maximized. These products are built to last.

Easier, Less Costly Venting
 
Because more heat is delivered to the water, the cooler flue gases permit venting through standard PVC, CPVC and ABS pipe. SPIDERfire can be installed virtually anywhere.

Power or Power Direct Vent
 
It can be installed as a power-vented product; or as a power direct-vented product – the latter for negative air pressure or if indoor air quality is a concern.

Corrosion Protection
 
Three-pass heat exchanger tubes are coated inside and out with a specially formulated porcelain enamel designed to protect against condensation.

Multiple Water Connections
 
Hot and cold water Inlets and outlets on both sides of the unit provide installation flexibility.

Full-port, Full-flow Drain Valve
 
Factory installed brass drain valve allows for faster draining and servicing.

Advanced Burner Design
 
Latest models have increased burner surface area for ultra smooth ignition and quiet operation

Direct Spark-to-Pilot Ignition System
 
Energy saving ignition that ignites pilot only when there is a call for heat.

Altitude Certification
 
Certified up to 8,999 feet

CSA/ASME Rated T&P Valve
 
Factory installed relief valve

DESCRIPTION
 SPIDERfire MODELS
GAL CAP. MODEL NUMBER INPUT (BTU/H)
NAT. & LP
80 GHE80ES-130(A) 130,000
80 GHE80ES-150(A) 150,000
80 GHE80ES-200(A) 199,000
80 GHE80ES-250(A) 250,000
80 GHE80ES-300(A)  300,000
100 GHE100ES-130(A) 130,000
100 GHE100ES-160(A) 160,000
100 GHE100ES-200(A) 199,000
100 GHE100ES-250(A) 250,000
100 GHE100ES-300(A) 300,000
100 GHE100ES-350(A) 350,000
100 GHE100ES-400(A) 399,000

(A) Indicates available ASME Model

  • Sealed-combustion design delivers 97% thermal efficiency dramatically reducing operating cost
  • 130,000 - 399,900 Btu/hr.
  • 80 and 100 gallon capacity
  • ENERGY STAR® certified for models up to 199,000 Btu/h

Documents

SPIDERfire
Brochure
Revit Model - (GHE80-100)
Spec Sheet
Tax Certification (US)
Use and Care Manual

Warranties

United States
Tank Warranty - 3 Years - Upgradable to 5 years
Parts Warranty - 1 Year