VentMaster™ is a series of power direct vent commercial gas water heaters that are a good choice for buildings with tight construction or when indoor air quality is a concern
Features & Benefits - VentMaster power direct vent commercial water heaters provide outside air for combustion, which eliminates negative air pressure issues in tight construction. Models are available in 150,000, 199,900 and 250,000 Btu/h, with a maximum temperature setting of 180 degreesFahrenheit.
Thermal Efficiency - Meets or exceeds a minimum of 80% (non-condensing)
System Sentinel™ LED Diagnostic System - Our exclusive diagnostic system, with glowing LED lights, verifies system operation sequence by sequence.
Patented Technology - Patented multi-flue tank design has a proprietary steel formulation with two coats of high temperature porcelain enamel to maximize corrosion resistance. This results in a superior, long lasting heat exchanger.
Integral Automatic Blower - The 120 Volt blower assists in quietly discharging combustion gases.
Gas Control System - The control system has a fully adjustable thermostat from 100° F to 180°F. The 24 volt combination gas valve includes main gas pressure regulation and an on-off manual valve. The 120/24 volt transformer and high limit cut-out allow for accurate and safe temperature settings.
Easier, Less Costly Venting - Installs with 3" or 4" Schedule 40 PVC pipe; no masonry or metal vent chimney is required. Can be installed virtually anywhere. Maximum vent length is 50 feet.
Base Rail Design - Provides better handling when moving the unit. Full-port, Full-flowDrain Valve Factory installed brass drain valve allows for faster draining and servicing.
Direct Spark-to-Pilot Ignition System - Less fuel consumption
Altitude Certification - Certified up to 5,000 feet
CSA/ASME Rated T&P Valve - Factory installed relief valve
Hand-hole Cleanout - Easy removal of sediment deposits
| VENTMASTER MODELS
NAT. & LP
(A) Indicates available ASME model